Cosplay-adjacent question, my living arrangement isn't so great this year and my work-from-home setup has taken over my sewing desk. I need to still make costumes for 2025, what's the best way to get a setup going for sewing? I cannot move my work equipment since I'll need them on a daily basis.

>>10944775

Second desk?

File: 128444d0677debbc2713ced95d296054.jpg (50.8 KB)

50.8 KB JPG

>Implying anyone reads anything before posting, including thread OPs
Noble but naive

File: 20241220_165343.jpg (709.4 KB)

709.4 KB JPG

>working on joshua graham
>got the shirt, boots, sleeve garter taken care of
>using mummy bandages instead of gauze, the white sleeves and such should handle curved areas like the nose
>need a new vest because I bought a cheapo Amazon one with pockets over where SLCPD and SWAT need to be
Question now is whether it's better to paint the vest markings or use one of those fabric markers you see at hobby lobby. I also need a Bible and the .45.

>>10944775
get a second desk/table and use the biggest of the two for what you need most room for.

Best way to be comfortable in cosplay?

File: 5a93f47570b7c709501984b8101e8c23.jpg (590.5 KB)

590.5 KB JPG

>>10944852
Without any further context...loose fit + breathable material. Also with POCKETS. If there aren't any, make some / use something that serves the same function

File: IMG-20241006-WA0154(5).jpg (489.7 KB)

489.7 KB JPG

>>10944774
Me as Hatsune Miku From Vocaloid

>>10944835
Try getting a toy m1911 on Amazon and painting it. It has an ejecting mag and a slide.
Maybe get a hollowed bible so carrying it around at a con isn't so heavy.
As for the vest I am unsure.

>>10944846
>>10944777
>Second desk

I know that is the most logical and simplest answer, but it's also a space issue. My sewing desk-turned-workstation is already crammed into my bedroom and there is no space for a second desk. I've thought about using the dining table but it also seems like a huge hassle to have to reset it twice a day and ensure there's no stray thread or fabric lint in food, or the risk of getting oil stains on fabric.

>>10944920
Do you sew every day or multiple times a week? Do you use your desk for work for home purposes every day or multiple times a week?
How big is your room? What items need to be in your room (bed, desk, etc) and how big are they?

There are space saving solutions but it helps to know what exactly the situation is before giving recommendations.

>>10944854
Thanks

>>10944899
>hollowed bible
Weak
Get a real one instead
It isn't that heavy

>>10944774
Whats some simple vosplay using everyday items for male. I know clark kent is popular. What else is there. I want to do something simple but at the same time eye catching. Preferably comics or mainstream Fandom. Not into big anime much other than one punch man.

Best glue to glue fabric? can't stitch anything sadly

File: 20250109_190323.jpg (656.6 KB)

656.6 KB JPG

First cosplay ever! I sewed the top half myself with a pattern from indigo patterns on Etsy. It’s a sleeveless button up shirt, jacket, and bow brooch. This is made with bed sheet and it’s my first time sewing anything with sleeves. The cosplay judging booth at the con I went to really liked it :) Skirt isn’t screen accurate because usps got delayed

>>10944967
I’d use your work/personal desk as a sewing space. I’m guessing that you have a pc and that’s the issue, right? Is it possible for you to store your pc and use a laptop instead? That way, both machines are easily portable and you can alternate

File: its-not-easy-being-cruel-cosplay-v0-lbzc3jvwn6yd1.png (784.2 KB)

784.2 KB PNG

Suppose I'm trying to put spots on a spandex bodysuit, do I paint it in or glue foam instead?

>>10944774
Need some help : I have glasses I want to temporary tint. Is there some kinds of transparent stickers that works for that ? I can’t buy another pair

>>10945706
Dont ruin your glasses for a cosplay. Get contact lenses.if you really want, you can cover your lenses with some colored plastic/film to give them a tint

Going to try making my own gloves & stockings to practice. Are there any patterns in particular that people suggest?

File: IMG_9369.jpg (330.1 KB)

330.1 KB JPG

my misa amane cosplay

>>10946017
actually super cute

File: cronacosplay.jpg (342.9 KB)

342.9 KB JPG

Going as Crona for this year's con. Would appreciate any advice on how to cut and style this wig to look more like Crona's canon hair. I know I will need to trim and hairspray it... But I really like the way crimped wigs look and hold shape. Do I literally buy a crimper? Do I brush it out after crimping? Do I have to tease it? How do I make the sides flip out after trimming? Etc...

>>10944856
Pretty sure you're cosplaying as a serial killer

>>10945673
I'd recommend trying to learn how to press your seams, but your cosplay doesn't need it nearly as much as the Homura behind you does.

Any general advice for sewing PVC/4-way stretch materials? I'm trying to make gloves for rouge the bat and I'm not completely sure how to go about it. I've made some basic templates out of spandex as a test but PVC has the look I want.

>>10946393
Pretty sure he is one

does anyone have advice for getting crotch snaps to stay closed without super glueing them together?

>>10944774
Are muscle cosplays still okay? I've been trying to bodybuild for cosplay, but from what I've read it seems like doing them is a faux pas these days.

>>10946849
I think it's fine if you're actually invested in the character you're cosplaying. I think most people roll their eyes because a lot of bodybuilders/gym-bros will just use cosplaying as a lazy excuse to show off their gains

>>10946849
you'll have to check the rules for the con you're attending to see if you can be shirtless or not. they might limit shirtlessneess entirely or they may allow it for men in cosplay photo areas, it really depends. i did see a man get informed he had to put on a shirt at a con i was at recently and i got a lot of amusement out of it

>>10946849
nah dont let fat bitches gaslight you into thinking that, people love it and will ask for pics with you if its a character people give a fuck about

File: IMG_9921.jpg (398.4 KB)

398.4 KB JPG

I cosplayed miyuki takara from lucky star , I want to redo the cosplay bc I barely styled the wig and I had the wrong glasses

>>10946892
You look great! Yeah, I think you'd 100% complete the cosplay with those changes

>>10946892
really cute!

>>10945677
I'd be embarrassed to post this

>>10948063
Thank goodness you are not him, thus letting anon be free to post his creation!

>>10946892
Are those moles or piercing holes

>>10948066
But I am him

>>10946827
Tailor the crotch to give the material more slack. Or use hook and eyes.

File: katanaman.png (791.7 KB)

791.7 KB PNG

I'm gonna be making a Katana Man cosplay. I've never made a helmet before, but I found a guide for making one out of foam. I'll also be making the blade from foam. What'd be the best way to securely attach the blade to the helmet? I don't want it to fall off or imbalance the rest of the helmet while I'm wearing it.

File: 20250308_112204.jpg (741.6 KB)

741.6 KB JPG

First cosplay from last night was mr. moot... The hammer was a bit difficult & messy but I wasn't rly going for perfection. Really had fun in this one I thought you guys would enjoy

>>10946892
hello please be by gf

File: Gasai.Yuno.full.921902-3666118841.jpg (951.2 KB)

951.2 KB JPG

>be a girl
>have pink hair

Are there any fairly casual but easily recognizable pink haired cosplays? Gonna be spending 12 hours+ in cosplay. I have a few in mind like Yuno Gasai, Hitori Gotoh, and Miyuki from lucky star but I want some more ideas. Bonus if the character wears twintails. (I have time to make the cosplay, I just want something that will be light for comforts sake)

>>10948789
human fluttershy

>>10948789
bocchi the rock

>>10948236
Magnets are a staple. You're not going to have a good way of keeping the helmet balanced except to try to weigh both sides equally, though.

>>10946242
>do i buy a crimper
A good one isn't cheap. If you do this you'll need to carefully control the heat so as to not melt your wig and you're going to want to section it so the most visible parts of the wig don't look like a frizzy mess.
>do i brush it out after crimping
Yes.
>how to make the sides flip after trimming
Take a hair straighter, heat up the ends, then quickly wrap them around something cylindrical. You can also use hair curlers and dunk the ends in boiling, then cold water. The idea is the plastic will melt into the correct shape when it cools off.

File: 1733143617481838.jpg (132 KB)

132 KB JPG

>>10948789
inori, madoka, shikimori

God why are lithium batteries that aren't awful so hard to source? They're in literally every device in the world right now and it's hard to just buy one that's the size and capacity that I need.

Fuck me i thought NCR Ranger was going to be simple for my first but these Duster prices are insane. I'm gonna hit up some Army Surplus stores around me for an equivalent coat instead.

>>10948365
nice mansion, anon! thanks for letting me sleep over, and that lamborghini you gifted me was too nice. and that ride in your private jet was awesome!

What kinds of putty would work for smoothly blending the edge of a foam panel with abs plastic that can adhere to both without damaging the foam as it cures? I want to modify a scooter helmet into a flight helmet by adding the bulges on the side that accommodate a headset.

best place to buy zentai suits of a certain color?
I will be wearing them during summer outside and I will wear shorts and shoes over them

File: IMG_2608.jpg (649.1 KB)

649.1 KB JPG

Finishing up my cosplay of Severian from Book of the New Sun that I'm planning to wear to PAX. I'm pretty disappointed in this cloak, but I had a tight budget so this is the blackest one I can afford right now. In the future I'd like to custom make one and give it a lining of some ornate fabric. I just finished printing the sword, so I'm going to spray paint it silver and gold, and then hand paint some details on the hilt.
I'll have to post a full-body once the boots I bought come in.

I continued on my cosplay
and now, I'm out of fabric...

Maybe a silly opinion question, but I'm looking into my first truly homemade cosplay. The thing is, it's a character that wears pretty normal clothing. Like the outfit is mostly stuff I could get as real clothing. However, it wouldn't be accurate to a few details/accents. I guess I'm wondering, do people tend to appreciate 1:1 accuracy or would they rather something be adapted/more realistic?

>>10949745
shouldn't be a problem if things are more realistic. for example, people wear safety shorts under their skirts, wear longer shorts, or put extra covering.

>>10946892
How did you do your eye makeup?

>>10948237
Cute

File: file.png (613.2 KB)

613.2 KB PNG

Working on my 1st cosplay. What paint do I use for painting jute? I don't want it to stain, or rub off.

I'm a newbie to cosplay and the questions may have been asked before but I don't care, so here goes;

I want to cosplay 2B from NieR:Automata (yeah how original) and considering I suck at making shit myself, I'm planning to buy it. I'm the fucker with too much expendable income so I would spend up to 800-1k euro for a good quality one. Is there any sites I could buy the full set (with or without sword), preferably in the EU so I don't have to worry about any kind of customs fees.

I have long natural hair, how the fuck do I put on a wig??

>>10952144
>I have long natural hair, how the fuck do I put on a wig??
Can't help you there, but do you have someone to style the wig? Wigs are rarely styled correctly from the factory, and even if they were, they're totally messed up from being stuffed into a bag

>>10952144
For putting wigs on with long hair, you're gonna need to do a braid and bunch it up at the top. It'll be a bit "tall" but usually adjusting the wig will compensate for that.

Any black characters to cosplay?
I did Ekko for my first

>>10952339
I don't really have anyone to do that, I dunno who do I even ask for that sort of stuff.

>>10952499
Alright thank you, I guess I could have googled for such a simple question but still, thank you.

>>10951978
is that morrowind armour?

I asked at the wig stall of the cosplay area of a con yestered day about putting red on white hair and was told I could sharpie it on, would this work well or do I need to properly dye it?

>>10952862
Gothic 1. It's the novice armor from the swamp sect.

File: brownbearwithmanga.jpg (261.4 KB)

261.4 KB JPG

>>10944774
I'm not sure if this counts but the costume didn't really get recognized

File: 1726875060461065.jpg (98.7 KB)

98.7 KB JPG

My last cosplay was really heavy and cumbersome to wear with a leather jacket, foam chest plate, large 3d printed prop gun and a 3d printed helmet that fogged up and limited vision.

So I want to do something simple I can wear more casually, and was thinking of pic rel. I can def make it, I just want to know if I'll look totally retarded if I got a beer gut as pt3 Joseph.

>>10953133
im the same lol, my past cosplays were just annoying to walk around in for a whole day so im going simple next time

honestly nobody will gaf about you. there’s so many ppl at the con and they prob won’t give a second glance unless they know the character. if you really wanna hide it though you can buy men’s spanks or shapewear

File: latest.png (546.8 KB)

546.8 KB PNG

I want to start cosplaying, specifically making props and armor. I figured Darktide enemies would be good, since they have grungy armor where damage can hide the mistakes I'll probably make, and most wear masks and helmets to hide my nervousness.
I guess general newbie question, but where should I start? Practice with other foam armor tutorials, start with easy stuff like the pauldrons, get the actual clothes first, etc?

>>10953564
What's your runway? Complex curves and getting the seams right are a pain. This is going to be a multi month build for a noob.

>>10946849
>>10946879
Its really simple
>Get shredded
>If allowed - go show off your chest
>If not - wear one if those meme abs tshirts

>>10953581
Do you mean where I want to wear it? I don't really have a set deadline or place, I just thought it would be a fun project that I could eventually pull out for cons.

>>10953630
If it's your first go, there are a lot of parts to fabricate, you don't know what you don't know, etc, and you'll probably need to combine foam crafting, kitbashing things like hardware store respirators and scooter helmets with other crap, and a bit of sewing, maybe some 3d printing.

If you don't know shit about any of these, I think it will take you months of working at it bit by bit on the weekends. Which is fine, but don't expect it to get MVP before fall. Warhammer shit is fiddly with lots of details. Its not like just jazzing up an affordable FOTM gacha daddy Chinese premade cosplay with some foamcrafting, sewing a few details, replacing fabric details with more accurate 3d printed or scratch built bits.

>>10953631
Thankfully I know a bit about kitbashing, sewing, and printing, so I can transfer those skills well enough! And I agree, it'll be a lot, but hopefully my love for it will make it an easier process too.

File: sdfssdf.jpg (142.8 KB)

142.8 KB JPG

Thinking of doing Sakamoto for a small con in my small city, seems simple enough to pull off. One hurdle is I actually want the glasses to be one-way visible. Given the history of anime, there's other examples of other characters with glasses like this, so I figure someone might know a trick or two.

File: 1114948-seekers.jpg (14.8 KB)

14.8 KB JPG

>>10951978
Looks awesome. If I knew how to make shit I'd do a Seeker cosplay

File: 47d.png (364.7 KB)

364.7 KB PNG

>had gotten ready for last year's AX with a Lupin cosplay
>Get one of the biggest cold sores on my lip that I've ever gotten in my life on the day before the trip
Is there a way to prevent this from happening again this year? I felt like a total creep through out the whole convention (other than make up because I don't know how to do make up for dudes)

I'm looking to cosplay Rider from Fate for AX, but the Ebay seller I usually use won't be able to ship it in time. Are there other sites I should be looking at, and is it fine to just buy it off Amazon and risk the clothing quality being shit?

File: 1735733361479892.jpg (858.8 KB)

858.8 KB JPG

It's me gray fullbuster

>>10954160
The thumbnail makes you look like a dog person.

>>10954160
Uh... we're on the same discord server, lol

>>10953768
>Where are some good resources to learn some simple sewing?
Your mother. A local sewing store. Search the web for "How to sew".
>I want to try making this outfit
That doesn't look simple... Have fun working with knits on the sleeves and vinyl on the gloves, ears, and vest on your first go at sewing anything
> I've got no real clue where to start.
Start by looking up how to make the costume you want and making enough time and buying enough material to make it three times. Any good tutorial will show you how to take measurements.
>>10954160
More like Gay Full-til-burster
>>10954475
He looks like he uses Discord

File: 1742648207296635.jpg (68.1 KB)

68.1 KB JPG

Looking to make a cosplay of Kaiji, specifically his look from the Restricted Rock Paper Scissors arc. I've sourced most of the jackets patches except for the blood chit on the back. Pic rel is the best reference I've found but it's shockingly low res.

I can have the blood chit printed if I find a high quality file. If anyone knows where I can find a high quality file or a premade blood chit to buy I'd really appreciate it.

File: 55CCBB7D-1EAC-4D75-B2AC-98B803068EE5.jpg (661.7 KB)

661.7 KB JPG

Got some boots to cosplay the silent hill 2 guy today

File: il_1140xN.3967317369_m9o6_webp.png (544.9 KB)

544.9 KB PNG

I don't know if anyone here can help but I'm looking for any and all armor making guides with foam and or worbla. I'm specifically looking for the plans for this one image I found.

This is my first full suit of armor cosplay, though I've got experience working with foam and worbla, but I'm not wanting to spend 20 bucks on a guide that I might not end up using.

Specifically looking for the one in the image but also down for any and all guides you might have.

File: casjhgayeucd.png (73.4 KB)

73.4 KB PNG

what would you use to make these ruffles or whatever in a miku cosplay? from the picture it seems to be about 0.5 cm thick
I do have some ruffle tape, but it is too thick and I havent found any smaller

File: baer.jpg (55.4 KB)

55.4 KB JPG

>>10944774
I SEWED MY SKIRT TOO LARGE I MEASURED MYSELF WHEN I WAS EASY BULKING WHAT THE FUCK IT BARELY FITS

THIS SHIT TOOK SO LONG TO FUCKING MAKE I DON'T WANT TO DO IT AGAIN

File: bartosz-sobolewski-faithkeepers3.jpg (373.8 KB)

373.8 KB JPG

Working on a cosplay of the Faithkeepers from Frostpunk, the Frostpunk 2 design in particular.
Got most shit planned out, but anyone know of a good way to simulate soot?
Like, i could just scrub my hands on some charcoal and rub em at the cloth, call it a day, but i would like to avoid the homestuck troll makeup thing of accidentally staining shit like chairs with the soot.
An idea i had was watering down black watercolors and using that, but it feels like there has to be a better way. I'm using a thick, rough cotton cloth for the main body of the costume.

File: Screenshot_20250524_131012_Gallery.jpg (450.6 KB)

450.6 KB JPG

>>10944835
UPDATE:
>ditched the previous vest
>have an entire bag full of spare wraps because getting 1-2 inch rolls involves buying an entire set
>wrapping the head takes patience to get it snug but breathable
>might invest in snakeskin boots and belt later
My trial run at the last con kept me indoors because venue security actually thought I was a cop

>>10953768
For a full beginner, i would recommend starting up with either something simple like a shirt or a jacket, where it doesn't matter that much that the measurements are exact, and then moving on to high-detail practice making something like a plushie. Making clothes for plushies and larger dolls is a great way to same on cloth money while practicing, it can build up quick even using the cheap stuff. Plus, less bulky to store.
Skintight stuff in general, like gloves and things that have to grip the skin like that bunnysuit, can be really annoying to make as a beginner since they require a lot of precision to look right, specially with less stretchy cloths like what that looks like it uses.

>>10944774
Im doing a cosplay of The Immortal from Invincible.

My plan was to just cover a blue shirt+pants with white and yellow tape, but my tape has started to fall off.

Should I just tape it all the morning of my event? Or try to paint the clothes? Idk how I would do that.

>>10955139
that's going to look like utter dogshit. Try sewing strips of fabric to the clothes if you aren't making a full outfit.

File: il_794xN.4758715320_nkii_webp.png (1.1 MB)

1.1 MB PNG

>>10955110
I see them mostly sold as mini ruffles or mini pleated lace, people use them a lot for lingerie!

>>10955132
I don't get it, can't you just paint the clothes and for your hands use a strong sealer?

Fuck broadcloth. Everything made with it looks like shit, and now that Joanns is closed I can't get anything else

File: bitchass_skirt.jpg (1023.6 KB)

1023.6 KB JPG

>>10955122
Okay, this shit's dunzo. I've handwashed and and hot dried the thing twice to shrink it, but anything short of elastic surgery isn't going to cut it. I've also been ironing and pressing for 45 minutes but some wrinkles just aren't going to come out, so FUCK IT. It's a full circle so it'll gather a lot and hide some of the defects. Now to finish the hoodie, hair ties, wigs, and props. Fuck me...

>>10955192
Unfortunately, I havent foynd any that small

how do i get over my bizarre particularity regarding cosplay? i feel like everytime i see someone in some store bought cosplay that they couldn't even bother to iron and an unmatched wig or tennis shoes i get annoyed more than i should, and then that manifests in me feeling like i need to try and craft the perfect cosplay idea thats way beyond my own skill level or competence, and i kinda just end up waffling. is it just a mental block from being overly judgemental? i feel like bad looking and lazy cosplay almost insults me, meanwhile i barely even go to cons

>>10955257
Try to at least make a small prop and see how it goes

Is James Sunderland wearing an m65 jacket? What model of flashlight does he use?

>>10955192
The paint thing is pretty much the current plan, just chucked it here in case I was being stupid and not realizing a simpler option.

File: niceass_hoodie.jpg (385.8 KB)

385.8 KB JPG

The jacket is almost done. I just need my buttons to cure, hammer them in, then hem the bottom 1/2". Working with ponte is a fucking dream.
>>10955257
>everytime i see someone in some store bought cosplay that they couldn't even bother to iron and an unmatched wig or tennis shoes i get annoyed
That's normal
>end up waffling
If waffling here means not making the cosplay well, you're just inexperienced. If it means you aren't making it at all, set your sights lower and know that you're better for at least putting in the effort.

what's a good fag-coded cosplay for someone that's fit to attract twinks and femboys

>>10955307
Just be yourself. I'm sure your affinity for poopy man butt will shine through.

If that fails, Eleanor Roosevelt

>>10955308
post your current work

>>10955312
damn, you're right that does look good. I don't know how you got that foam vinyl or whatever it is to fit around like that, but I'd make little darts around the sides to make it look fitted if that doesn't fuck things up. The left heme is a bit wonky but sewing a running stich through it to match the reference will make it look better.

File: nip_nametag.jpg (11.5 KB)

11.5 KB JPG

How ought I construct this nametag? I was thinking of drawing the art in some nonstandard size, laminating it, then glueing a manilla folder to the back of it and cutting it out. I would like to buy a yellow namesleeve if they exist, but if not niggerrigging it is the next best option

Anyone knows if there is some special wash care for aliexpress polyester cosplays or can I just toss it into the washer?

>>10955405
Hand wash everything

File: best-bald-anime-characters.jpg (199.6 KB)

199.6 KB JPG

Are there any good cheap bald caps I can buy that are also reusable? I also never used a bald cap before, any advice or things I should know before handling it? I don't really need it to look super spectacular or freakishly realistic or anything either to be honest, it's mostly for a joke cosplay, looking sort of bald is good enough for me.

>>10955563
Go all in, shave your head.

File: can.jpg (352.6 KB)

352.6 KB JPG

Soon.

File: balls.jpg (392.6 KB)

392.6 KB JPG

I fucking HATE hotglue

>>10945677
>cruelty squad.
Simple and effective.
Honestly a light coat of pink facepaint and a comical looking foam gun and this would be perfect.

File: offkilter.jpg (251.3 KB)

251.3 KB JPG

>>10955680

it's a bit wobly but what the fuck ever it needs to be done by tomorrow

my wig is absolutely fucked and detangler isn't working

File: 9c3e5c5ef661e178f0132048cb2a8d5b.jpg (360 KB)

360 KB JPG

Where can I get a relatively okayish looking oversized straitjacket for an MGSV mantis cosplay? Chinkshit is ok, Aliexpress is only showing bolero straitjackets, or other ones that cut off at the chest.

>>10944774
Hello
i am new to cosplay
could anyone tell me any good sites for buying cosplays and cosplay related materials?

>>10956042
Read the sticky and help thread, dumbass

>>10956143
did not realize there was a help thread
thanks

File: rinkdayoffcensored.jpg (1.2 MB)

1.2 MB JPG

>>10955751
it turned out okay. I despise working with wigs but I'll need to get good eventually.

File: rinkassedit.jpg (676.9 KB)

676.9 KB JPG

>>10956531
another photo

File: s-l1200.jpg (248.6 KB)

248.6 KB JPG

Never made cosplay or cosplayed before, but I figured this would be the place to ask. I was thinking about making a cultist robe, the idea is that it's an anonymous host body for a large group of cultists that could use magic to take turns being in control of the body. This would be shown by me making some sorta ritual or magic trick thing, and then changing my voice and mannerisms.

The thing I wanted to know here that my idea sort of relies on is... is there any decent ways to get a blacked out face effect for a cosplay so I could maintain the illusion of being a faceless entity? Like I think there's some black see through stuff people use for costumes where they want to hide the face right? Would that actually look good for this or is it way too obvious?

I looked at google for images of cultist or grim reaper cosplays but none of them seemed to be going for a blacked out face, either all having their face out normally or using some mask instead.

File: d8w7Guf.gif (1 MB)

1 MB GIF

>>10956537
>This would be shown by me making some sorta ritual or magic trick thing, and then changing my voice and mannerisms.
Taking suggestions on this too if anyone has any neat ideas, I'm going more for a comedic style than a spooky lovecraftian horror so it's fine if it's a bit silly or cartoony.

If anyone has any idea how to make some simple puff of smoke or anything that looks like a little goofy magical effect I would love some advice on that, like if I could maybe do something like this scene from kung pow.

File: Nerd Armin V1.jpg (2.6 MB)

2.6 MB JPG

My First attempt at Nerd Armin from AOT/AOSC
Turned out ok I guess but definitely making quite a few tweaks for my next attempt

>>10956707
Serial killer vibes

>>10956726
So I keep being told haha

Oh well...

>>10956707
Party on Garth

File: Fullmetal-Alchemist-brotherhood-Edward.jpg (108.8 KB)

108.8 KB JPG

I'm going to Dublin Comic Con next month as Edward Elric

File: 1750265591129663.png (620.8 KB)

620.8 KB PNG

>wig looks good when looked at from the sides, back, or angled front but looks flat when viewed directly from the front because the bangs blend into the rest of the wig
is this a problem?

Where do I even go for wigs that aren't total horse shit? Never bought a cosplay wig before

File: cant-see-thru-it.png (17.9 KB)

17.9 KB PNG

So I want to get a gauge for how possible it is to use cameras on a helmet to see (as in actually be able to see in front of and around myself) with screens in the helmet in front of my eyes.
Is there a low latency kinda streaming setup I could do somehow? Would the screens be too close to the eyes to be used practically?

I ask this 'cause a common complaint about masked cosplay (and stuntmen) is that its hard to see out of the mask, if at all. This would make a cool project if its actually possible, like a temu bootleg Ironman lol.

>>10956956
Possible, yeah. But wholly impractical, adding a ton of pointless weight and complexity.

Just use a mesh screen over your eyes if that part of your face will be covered by a non-visor element

Going to Fan Expo Chicago this year,Gonna be a wizard playing a game of chance with other patrons. Will security understand the meta or will I be asked to leave? Im black by the way.

File: proceed.jpg (152.3 KB)

152.3 KB JPG

How do I make this mustache? Kyora Sazanami from Kagurabachi.
I can't find anything premade that looks the same shape or color. I've watched videos of people making a mustache manually with wig lace and loose hair, but it looks really time consuming, and I don't even know if it'll work when I need the mustache to be this big. Would the hair even be dense enough that I could make it hold this shape?
Is there a faster alternative that will still look good?

>>10956936
Wigs are always shitty, you need to learn how to spice them up.
If your doing a custom hairline, use FossShape, otherwise get a decent quality wig, a faux head, and a fuckton of hair spray, mousse, hair iron, and a comb to shape it how you want.

>>10956977
Long as the "wizard game of chance" isn't russian roulette and you follow the rules you'll be find.

File: 1736657429511818.png (188.5 KB)

188.5 KB PNG

Please tell me about your experiences with gray hair dye and which one you used

>>10955312
hiii do you have a sewing pattern and/or more pics. for inspiration and research.

>>10956531
how the fuck is it possible to put all this effort and money into getting a cosplay together but you can't be bothered to shave your arms?
kys gorilla tranny

File: DJNB.jpg (339.3 KB)

339.3 KB JPG

>>10957184
I polished this a bit more
As for patterns, I don't have any, I really did just eyeball this.

Want to cosplay Kamina but not sure what to get. Doesn't have to be perfect.

I'm thinking either flared yoga pants or Thai fisherman pants. Bandages from CVS. Kamina glasses from Anime glasses from animeeyewear.com.

Not sure how to get the tats or cape at all.

File: 20250725_211407.jpg (1 MB)

1 MB JPG

Would like some honest opinions about this. Its a Mikuo cosplay. I havent done the detached sleeves yet.
Do you think the shirt looks ok?
For Mikuo I have seen it with and without sleeves. I went with no sleeves for better mobility and because fuck sewing sleeves. Still not sure if I like how it looks. Also, is the ruffle on the shoulders too much? Should I use bias tape instead? Or nothing?
Also, the ruffle at the bottom crumples the fabric (its stretchy) should I use interfacing before sewing the ruffles?
Finally, I have doubts about the shoulder darts. Should I make them vertical? They cause some crumpling over the chest, but I dont know if vertical darts would fix it.

Thanks.

>>10957285
do you have plans on how to deal with that bulge or is that supposed to be part of it?

>>10957864
whats the point of dressing like that if not to show the bulge?

File: Screenshot_20250728_113716_Amazon Shopping.jpg (265.5 KB)

265.5 KB JPG

so I purchased this wig,should I dye my eyebrows to match when I wear it? If so what's a good temporary dye to use?

>>10957965
for a wig that looks that cheap, paint your eyebrows with theatrical makeup

>>10957965
you just need some blackface to go with it

Question, I got some pencil markings that are bleeding through when I hit it with plasti-dip
Is there any way to cleanly fix the bleed through or should I just roll with it? It's barely noticeable to anyone who ISNT me but i'm severely autistic about details.

>>10957965
While you were still learning to SPELL YOUR NAME

>>10957865
this anon knows whats up.
>>10957864
The bulge stays!

trying to learn how to do papercraft shit with cardboard. got a template for the character from deltarune chapter 3, Tenna, but i don't know the first thing about bending cardboard around. once i do though, what should i do to put color over it? i was thinking of painting it, but what would you guys recommend?

>>10958360
Acryl-colours
Cardboard usually don't need proper priming either

File: DD cos.jpg (123.6 KB)

123.6 KB JPG

>>10958379
wanna pull something like this off, for a con in november. I want more of a 1975 MSF look or some sort of combo with the soldiers from peace walker and the lost soldiers from MGS V. Any general tips someone might have that's pulled off something similar? This'd be my first cosplay, and I'm willing to do some DIY, not just buy the shit off of a surplus site or something

File: Screenshot_20250812_055215_Brave.jpg (476.9 KB)

476.9 KB JPG

Looking for something like this for my Agent Venom cosplay but that isn't 130 fuckin dollars, the print files for the costume itself has thigh pads but they're ugly so looking for alternatives with that tactical look

File: IMG_1419.jpg (2.4 MB)

2.4 MB JPG

Welcome back, Frank Punisher based on the Steve Dillon artwork. I had a Lycra with the skull printed on. But after years it started to peel. My friend made a skull made of cotton fabric and sewn it on so when I wash the cosplay, won’t peel.

File: snek.png (474.3 KB)

474.3 KB PNG

Ok everyone make fun of me for being a touristfag and laugh at me for making a whole thread because for whatever fucking reason you guys don't title your QTDDTOT threads as QTDDTOT threads. Migrating post question...

What do gulls use, generally, for overly-long bandanas/arm wraps/flowy-whatevers-you get the picture? Using Snake here as an example but that's kind of cheating since there's a million etsy shops making his bandana. Do you guys buy yards of cloth and cut them thin? Buy pre-made, thinner spools of cloth? I'm at a loss here. Jelly rolls of cloth are ok but they're generally capped at 45" unless you custom order.

File: Gym275dbMAAr_HY.jpg (120.1 KB)

120.1 KB JPG

i'm a beginner and wanted to try making a mask like this, is there any tutorial on how to do something similar to this? 3D printing seems like a given but i have no idea how to do actual assembly or if there's a 3D model around that i could easily use

File: 1739721572346548.png (369.7 KB)

369.7 KB PNG

>night before con
>style my wig perfectly
>put it on the wig head

>day of the con
>wig messes up a bit from being removed from the wig head and put on my head
>cant get it as good as the night before

File: Kureiji-Ollie.png (702.2 KB)

702.2 KB PNG

thinking of cosplaying a simplified version of picrel before years end, can anyone more learned than I tell me what that white part hanging off the front of the kimono is? Like what's it called and how it fits in with the rest of the outfit?
Is it part of the obi? If so should I assume the obi has at least two completely separate trims, colors, and patterns? And isn't the big red bow usually part of the obi too? How can it be all three? I can't tell which part is a separate thing because it just doesn't make sense to have both a bow knot in the back, AND a front fold drape, all being different colors, patterns and in the case of the red bow, fabric

>>10949745
>do people tend to appreciate 1:1 accuracy or would they rather something be adapted/more realistic?
It depends. I don't think you need to be 1:1 accurate to be good (and in fact, just from the nature of anime, some 1:1 would look worse than changing details a bit). However, what people appreciate are the small details (even if not 1:1, small details unique to the character are often what makes a cosplay stand out to me).
That said, don't sweat it; first homemade cosplay,enjoy the process, people will still like your cosplay regardless.
>>10953102
Or they did; I wouldn't approach within 10 feet of you IRL, although I think its hilariously degenerate

Does anyone have any good tutorials on makeup, especially for cosplay? More specifically- for men?
I want to nail my next cosplay, and I can tell it would look a lot better if I could add more sharpness to my face/nose and flatten out the color to be more pale. Googling gave me some okay answers, but if anyone has any good resources (books I could buy, specific youtube videos), that would be great- even if its just beginner makeup, as I have 0 ability right now.

>>10957819
Update here.
I wore that Mikuo costume to a fan event on Miku's anniversary.
It went well, photogtaphers and other cosplayers asked me for pictures. I think I got more attention than when I wore an Aliexpress costume, so I think it did come out ok.

File: legoshi.jpg (120.9 KB)

120.9 KB JPG

Low-effort Legoshi plz rate

Also does anyone know where I can looser pants of this vertically grey-striped style? These are a bit tight on me and were very hard to find

>>10960408
You need some indication on your head, or maybe arms....I can't help, but you are just missing a slight something to be instantly recognizable. Maybe the angle hides the tail too much.
That said, if you can nail his slouch you will be instantly recognizable (probs)

>>10960408
You look like a hipster from 2010

>>10960467
I think I need wolf-nose paint and maybe some furry claws on hands

>>10960408
classy, but needs attention to detail

>>10960515
tell me more

>>10946393
Well of course, there's a reason Miku lives in your Wi-Fi anon.

>be me
>go to anime event
>lots of people ask to take pictures with me
>take some pictures with other cosplayers
>back home
>look at my pictures
>look like a killer clown

ughh, I have to practice makeup more

i thought being Abby from the saja boys would be fun,cheap and easy but, not having abs, the only way my autist self would justify it is by buying one of those $150 plus latex muscle suits..am i just overthinking this and should just wear a undershirt with abs spray painted on them or something?

Thoughts on what to add to a lex luthor cosplay that would make it more recognizable than "random well dressed bald guy". I was thinking of having green glowstixs to carry around to play threaten supermen with.and im getting a Krypto plushie to somehow make it look like its attacking me? biting down on my arm /leg somehow? i was looking for a luthorcop mug and shockingly they dont make one..

File: 074dfc7e3a97bd8cfbf5eae3ac9f610c.jpg (51.5 KB)

51.5 KB JPG

>>10960678
how about this?

File: giyu if he real.jpg (3.2 MB)

3.2 MB JPG

>>10960578
I got so many compliments at a weeb con for my Attack on Titan outfit that I decided to start going to cons more and wearing cosplays more just to chase the dopamine high of validating compliments from strangers (and a few cute girls too). Best part is the cosplay doesn't even have to look good, people just compliment you for trying, which is sweet.

>>10959570
You can either do a pepakura with EVA foam or if you already have a printer, check cgtrader.
There's a full mask on there for 3$ currently but you'll have to separate the jaw yourself on your slicer it looks like.
Just use elastic to attach it, maybe get some furry eye mesh in black for the sockets.

Any one have a good recommendations on shirts for pirate cosplay?

>>10944774
Is there an archive or thread for event/convention cosplay photos that aren't necessarily professional pics?

File: 1621614155082.jpg (249.4 KB)

249.4 KB JPG

>order an item in March from Etsy
>want it for a con in May and pay extra to get it quicker
>tracking number just shows it was created and hasn't moved
>misses the May con and still hasn't shipped yet
>message the seller and she says she's been in and out of the hospital but it should be shipped
>track package
>label created but USPS hasn't received it
>finally ships in late June but goes to another address
>check tracking number with USPS and the image of the package doesn't have my name or address on it
>lady says she has no idea what happened but will create another and send it ASAP
>have another con in September and she says it should be done before then
>tracking number created in August
>"tracking number has been created but USPS hasn't received the item"
>try and get in contact and she says her dad died but everything should be shipped
>that was half a month ago
Have I just been scammed?

>>10960994
>Have I just been scammed?
That's nothing.
>order custom item in June from Etsy for 300 dollars
>order claims "expected arrival" is for late July
>late July comes, message seller to ask about shipping, they finally ship it
>arrives mid-August, try it on, it's four inches shorter than it was advertised as being
>message seller, they say to send it back and they will make it longer
>spend 70 dollars to internationally ship it back
>get reimbursed a 40 dollar coupon for their Etsy shop
>according to tracking number it still hasn't arrived since it shipped in mid-August
>when it does arrive the idiot seller will have to pay ~120 dollars to claim it from the office and then another ~70 to ship it
>if it ever does come back it'll be about 6 months since I purchased it

>>10960994
yes, chargeback that bitch and report her to etsy

File: zenitsu_form_1.jpg (108.3 KB)

108.3 KB JPG

My latest Cosplay of Zenitsu, quite happy with it.
Wore to a small con and to the cinema for Infinity Castle

>>10956956
Old post, but whatever. For larger masks I've hooked up my phone on the inside and positioned the peephole to where my phone camera looks out, and hooked up to a power bank to stay on constantly. It works pretty decently, but can be an issue being too large (get a secondhand smaller phone in this case) or too close to your eyes to be able to focus on. There are other methods you can use like Arduino/Raspberry Pi with smaller cameras but phones are much easier to work with, power, and set up if your mask has enough space for one.

Doing an Bleach cosplay Urahara kisuke. For a local con Next week, going to make Benehime with cardboard. Trying to figure out a 3 way came into cane sword into proper swordwith basicz cardboard locking mechanisms and a hatch release.
Will post pics of prop once made. Maybe a pdf of people are interested.

File: 1200px-BlazBlue_Cross_Tag_Battle_Naoto_Shirogane_Main.png (773 KB)

773 KB PNG

If a guy cosplays as a female character who dresses in traditionally masculine clothing is that considered crossdressing

>>10961109
It's crossdressing because a guy is pretending to be a girl.
>traditionally masculine
Irrelevant.

File: LycoReco (62).png (677.5 KB)

677.5 KB PNG

>>10961109
Crossplaying because it's a female character but not exactly crossdressing. No big deal either way

t. Crossplay OP

File: 20250921_230219.jpg (3.8 MB)

3.8 MB JPG

Digging through old stuff.
Who is this character? Please help.

File: file.png (520.7 KB)

520.7 KB PNG

I have a long coat, I want to give it 4 "tails" much like this, how does one go about that, I'm sure it's a bit deeper than just grabbing a scissor

>>10955133
Several months late, but I think you nailed it, good job

>>10961059
Iron your shit

File: IMG_3879.jpg (2 MB)

2 MB JPG

>>10944774
Daredevil

>>10961448
>pic taken before breaking into the house

>>10961109
>>10961168
I'm a guy, I want to cosplay someone from umamusume, but the trainers kinda look nothing special. I would go for one of the Gold family, for this reason.

>>10961109
Its crossdressing and cosplay, its crossplay

>>10957285
wew

>>10961448
Dinduvil

>>10961610
“We was Guardian Devils and shit!”

File: Zenitsu1.jpg (7.4 KB)

7.4 KB JPG

>>10961221
Will do, thanks for the suggestion Anon

File: IMG_3700.jpg (2.2 MB)

2.2 MB JPG

me as stocking paswg

File: Flag sheet.png (1 MB)

1 MB PNG

Reposting from other Beginner thread since no one replied since Saturday.

Hello, gulls.
Complete neophyte to costume making and cosplay, but I wanted to get into it for some Halloween parties coming up.
I want to do the Flagellant from Darkest Dungeon, given that he seems relatively simple to assemble.

Questions for the experienced as I blindly throw myself headfirst into this:
- The leg and arm wraps are easy enough (gauze rolls dyed with black acrylic paint), but how do I make the stud looking things in his arms? I'm pretty sure in-game they're metal bars impaling him, but I like to un-impaled.
- What material do I use for the hood? It needs to cover the eyes but I'd like to be able to see. Is cotton muslin sheer enough to hide the eyes will still allowing vision, or do I use something else?
- I can't tell if his skirt would be made by a single piece of fabric wrapped around the waist, or if it should be cut from a larger piece. If it is cut, what shape do I make? I was thinking a diamond shape, with the top and bottom points longer than the sides (to cover in front and behind but leave room in the sides to move), and then cutting out a portion in the middle of the diamond to wear it. I'm very new to fabric work so please tell me if I'm being retarded and overthinking this.
- For the flail/collar/bracelet, do I stick to EVA foam, or is there a chance I can (on the cheap) make them out of actual metal? Granted, I have basically no tools or experience for metalworking, so I think this is kind of a long shot.

Additionally, I've never touched EVA foam in my life. Do I have someone make them for me (please give trusted vendors) or do you think I could do it with some good tutorials (please give me good tutorials). I've got about 2 1/2 weeks to make this work, and I think it can done in that time.
Thanks in advance, frens.

>>10961188
faris nyannyan

File: 20251001_182631.jpg (2.2 MB)

2.2 MB JPG

Something weird happened
I made this >>10957819 and at some point noticed some black stains that I dont know how I got
Anyway, I tried washing it but some much larger stains appeared on the armpits area.
I have no idea what these are. I didnt use any marker when cutting, the only source of black color I can think of is lycra fabric under the hologram coat, but why would it stain only onnsome areas? A reaction to sweat or to deodorant?

>>10961762

I can't speak to the rest, but I can tell you my experience with EVA foam.

It's actually pretty easy to work with. Despite this, I watched a terrible video about how to use it and my first attempt was... okay. I watched a bunch more and my second attempt turned out pretty well. I still need some practice with blending seams, but otherwise not bad. I wore it in public and wasn't ashamed of my work.

I think these videos from Kamui Cosplay were the most helpful:

https://www.youtube.com/watch?v=dN3NHy7Asqc
https://www.youtube.com/watch?v=E73AEz7t84E
https://www.youtube.com/watch?v=ROZlkW96hFI
https://www.youtube.com/watch?v=ZbB2_pp24m8
https://www.youtube.com/watch?v=bu749s4VxWM
https://www.youtube.com/watch?v=D8Jo-DmXvcI

Also, 2-1/2 weeks isn't a lot of time! I started my build two months before I needed to finish it...

My cosplay requires me to be in a black morph suit and my character doesn't have any shoes, but the con I'm going to requires shoes. Are ballet shoes good enough that it'll look like I'm not wearing shoes or are there other options for soled footwear?

>>10961881
Could you just use black sandals? Or flip-flops if you cut and sew a tabi-like toe into the morph suit?

as a fat guy, I'm going with my D&D group to Armageddon later this month & intend to cosplay for the first time.

Marshall D Teach (One Piece) x Marshall Cuso (Common Side Effects)
both fat guys in open pink button up shirts. bought glow in the dark blue mushrooms, might make a sign and will buy Blackbeard pirate merch there.

File: 699cf1ce.jpg (86.9 KB)

86.9 KB JPG

Ayanami is the only choice

File: de blud.jpg (133.3 KB)

133.3 KB JPG

Flagellant anon here, new question since most of the previous ones have been dealt with.
Does anyone have any advice/recommendations for fake blood capsules/bags? Everything on the clothing already will be dried in, watered-down acrylic paint, and the scars/wounds are going to be liquid latex/makeup, but I need something to both bleed from the mouth and have a (soft) explosion of blood from the hand. I could probably achieve the latter with stage blood in a small plastic bag that I hide in the hand then burst, but I don't really have any experience here.
Basically, recommend me blood capsule/stage blood brands. Needs to look fresh and flowy.

Any recommendations on embroidery pattern software that don't cost a thousand bucks?

>>10944774
Not really sure where to ask otherwise but where do you guys get your fabric since JoAnn went under? No hope for anyone buying it to bring them back as Michaels already has and wants to basically take JoAnn and turn it into one or two aisles in only some of their stores; knowing the strange prices at Michaels I also doubt I'll ever want to buy anything in that aisle (their leather tools cost about 4-5x Harbor Freight for about the same quality). Walmart and other stores only stock pitifully small pieces of felt and maybe some very basic fabrics like fleece, not to mention a lot of places only offer fabrics in 1yd pieces. My only real hope to get to a physical store that stocks fabric is Hobby Lobby but it's quite a drive.

>>10945671
Contact cement. But really just sew by hand unless you have some condition that won't allow it. Avoid heat.

>>10945706
Window tint film? Might peel up and you have to very thoroughly clean your lenses to apply it (like applying a screen protector, you want all dirt gone) but it's only like $20 a roll or less. Used on house or car windows usually.

>>10948236
Polyurethane sticks to polyurethane so if you go with Smooth-On foam and pour a piece to make the mask from, then some long rectangular boxy pieces for the blade and the handle, you could theoretically just "glue" these three together when they're nearing completion of carving by mixing up more foam and slathering it on the "blade" end that goes against the forehead then pressing it to the helmet and holding. Never tried it but silicone works the same way. Freshly mixed silicone will stick to fully cured silicone if poured over it. Freshly mixed polyurethane foam/polyurethane resin will stick to fully cured polyurethane foam/polyurethane resin. I may recommend a slightly soft variation of the foam like FlexFoam-iT!, but not something too soft where it goes floppy. Hard foam can be very brittle and while your pieces shouldn't be too thin, breakages in foam suuuuuuuck. You might also want to put a wire in it but make sure the wire goes AROUND your head and not something that just ends at your forehead so you don't have a nice sharpened spike at your forehead at all times.

>>10955269
3 months late but the jacket is kinda close, hard to say; also look into the regular BDUs or shirts that are in OD green. Rothco probably has it and then if that's not cheap enough you can buy a real one on eBay if it might be cheaper that way. Can't find great pics of the flashlight through a lazy search but the one I did find, definitely an angled head surplus flashlight if you're talking the one clipped to his chest pocket. Something like a Fulton MX-991. Knockoffs available on Amazon and at surplus stores, no doubt. This is the kind of flashlight that takes 2 C or D batteries, so be sure to buy some AA to C or D adapters if just to prevent it pulling on your shirt or constantly falling off because of the weight.

>>10958908
>gee Bill, TWO pistol belts?
I also spy some M16 30rd mag pouches (canvas ~$40 instead of nylon ~$3-15) and an M-12 holster (~$35). Also the M12 is from the 1980s, used for the 1911 and Beretta 92FS (adopted by the US in 1985) so it may be a little anachronistic for ~1975. However that doesn't mean anything if that's what the game uses as MGS is known to do things like that, not to mention the 92 has been made since 1976. The 1911 has existed since, well...

>>10961815
Maybe the holographic coating is degrading? Would explain why it's happening at the edges. Sorry, anon. =(

File: summerween.png (1.1 MB)

1.1 MB PNG

I am cosplaying as the summerween trickster for halloween and a con.

I got some oversized jackets that I want to put some padding over, to create that big-shouldered, sunken-headed effect.

What should my strategy be for padding? Just football pads? Is there any kind of padding that is more "square" that football pads?

I also want the chest puff effect.

Anyway, what shoulder-padding strategy should I use for the oversized jackets?

>>10962279
>Maybe the holographic coating is degrading? Would explain why it's happening at the edges. Sorry, anon. =(
yeah, someone else told me that, never using this fabric again

File: Pirate_2.jpg (1 MB)

1 MB JPG

I asked for help twice and not a fuck you, what'd ya need or NOTHING!

>>10963014
Need a vest on top of that shirt, or some bandoliers and other belts to make it more interesting. The sash around your waist should also hang down more. Should be more loose and hanging pieces, more damage, looks more piratey.

>>10949634
I feel like if you bought a leather fetish mask and modified it you could have a pretty good product. Also you need your cloak to be Vanta black you noob

File: Screenshot_2025-10-29-23-01-16-082_com.miui.mediaeditor-edit.jpg (503.1 KB)

503.1 KB JPG

this was the first cosplay of mine that actually took some time and work beyond altering some clothes, how did I do?

File: IMG-20251011-WA0064.jpg (199.7 KB)

199.7 KB JPG

>>10963183
back

>>10963183
lookin nice!

File: gengar.jpg (110 KB)

110 KB JPG

>>10944774
First time I ever post on this board, gengar cosplay for halloween
No, I do not have an onlyfans or anything I just don't really have social media to share this on

Are there any good cosplays to use a big surplus of towels for?

>>10963259
loving it

>>10963269
Thank you anon, I appreciate it

>>10963259
Looks awesome! First cosplay or have you done more? If you have it would be great if you posted them

>>10963269
The McDonald's jingle? Because he's fat? That's just mean

File: gengar cosplay.jpg (147.4 KB)

147.4 KB JPG

>>10963274
I did a long time ago but I don't have the pics anymore
I plan on doing a lot more cosplay, but I have 0 understanding of social media because I never used it so I dunno who to post it to (I am a 4chan autist)
Maybe I'll just do it for the fun of it
Here is a more fan servicey pic of the gengar cosplay for now

>>10963276
Thank you I appreciate the fanservice

>>10963259
fat

File: 624f6688be9448d892addc663cf50096.jpg (133.4 KB)

133.4 KB JPG

Any ideas on where I could find a vest close to pic related? Probably the only thing about this I'm having a hard time trying to find.

>>10963337
looks like a pretty standard waistcoat with some suspenders over it
you should be able to find something similar at pretty much every large clothing supplier, even amazon should have a few cheap ones.

File: Pirate _5.jpg (1.6 MB)

1.6 MB JPG

>>10963014
Follow up from last night

>>10963259
>>10963276
Hey me again, I want to ask for help with cosplay
What is the best way to get cosplay stuff shipped to Germany? I want to try cosplaying Lisa from Genshin and I'm not sure where to start

>>10963465
you need help buying another cheap onesie from ali?

>>10963665
No, because if that was the case I'd just order one
I want help finding the good stuff because I have no clue where people get it and all I am stuck with is shitty stuff

>>10963744
>I have no clue where people get it
They make it

>>10963805
So there is no intermediate step? just from shit poor quality to self made?
Guess I have to get started then, thanks anon

File: db98aa951e92f84b45f2505389a3bde0.jpg (64.4 KB)

64.4 KB JPG

I want to cosplay lucifer from hazbin hotel but I have next to zero chance of finding a lilith at 6 foot tall. Why is being this tall suffering

File: DoctorDann.png (302.2 KB)

302.2 KB PNG

So I want to cosplay Daan but I have questions about the getting a similar enough vest, the "tie" and a wig for the hair. I found some checkered pants that look similar enough and I can just use any button down that's a bit tight on the cuffs that'll work.

File: IMG_5117.jpg (466 KB)

466 KB JPG

“Because I’m Batman.”

>>10964774
Dark as the night

>>10964776
Funny.

>>10964456
he looks like he has the colonel sanders tie0

Good place to order decent premade costumes? I'm trying to get more stuff to dress up my egirl

File: file.png (303.2 KB)

303.2 KB PNG

The armor pieces can be 3D printed, but if I wanna make this, where's a good starting spot for looking around

File: meishodoto.png (768.4 KB)

768.4 KB PNG

any pattern recommendations for meisho doto?
>>10964843
>>10963465
dokidoki, uwowo are decent

File: lord-starkiller_star-wars_gallery_662681abf35d6[1].jpg (341.2 KB)

341.2 KB JPG

First time actually posting here. Im not really a cosplayer but I enjoy 3D modeling helmets in blender, printing them, but I've only recently started actually finishing them and painting.
Does anyone with more experience than me know how to achieve a metalic/brushed metal look?
I'm just now working on pic relateds helmet and all my previous helmets like from Helldivers and For Honor came out very flat with just a normal spraycan

File: hfghthftyh.png (696.9 KB)

696.9 KB PNG

sisbros, how would you make a big bow like this? I bought the costume from ali, but the bow it came with looks like shit
this pic kinda looks like satin just cut to shape and burned edges

File: IMG_1368.jpg (319 KB)

319 KB JPG

Kennith Sullivan of STARS Bravo team. Bravo doesn’t get enough representation

File: z1.jpg (55.4 KB)

55.4 KB JPG

First time cosplay. I'm putting together a screen correct homage to Zatoichi, The Blind Swordsman.

File: 342823.jpg (10.2 KB)

10.2 KB JPG

Trying to locate a raglan like misaki's is absolute fucking cancer aids, makes me want blow my brains outside, I've been searching for 4 fucking hours. It doesn't fucking exist, everything is WRONG WRONG WRONG :(

>>10966385
for big bows like that you can kinda just cheat it, make the two big triangular bits (you can technically make them together but idk hwow to explain) and use some interfacing for sturdiness, if u rlly want it to stay up right you can insert wires. Then sew those two bits at the point and wrap a strip of fabric around.

for the dangly bit just make them as two long pieces with each shaped and if u don't want it to look like shit you must use interfacing. (leave the center bits without interfacing or it might stick out sidewards instead of downwards) and just sew it on the back of the of the bow where the knot is.

not a pro but this is how i'd approach it hope this helps.

>>10966805
Update, only fucking one is from some sport supplier for baseball, we see how the cut is, shits fucked

>>10966805
just get a black and white one and dye it yellow ?

File: file.png (3.1 MB)

3.1 MB PNG

>>10966832
Well they must exist SOMEWHERE

File: 654534q23.jpg (256.3 KB)

256.3 KB JPG

>>10966805
I dunno if you can sew but assuming it's the color combo that's the issue this would be very easy to diy by buying one with black sleeves/neckline and just replacing the torso part with yellow, using the pieces from the original shirt as your pattern.

>>10966842
Honestly thats a option if I could get the right kinda yellow
>>10966843
That one is wrong wrong, the fucking sleeves are 3/4. The problem is misaki has bizarro full long sleeve ones
>>10966846
Long sleeve raglan are rare as hell for whatever reason rn. Of current options go to shit I'll fucking get patterns and DIY the shit out of spite


At least a denim mini is easy as hell.

Getting the puzzle top would need custom printjob however I think

Total noob at sewing here. I decided on a certain cosplay and want to ask a pro for help and sewing patterns. But do people even need those once they are proficient? Maybe it's all eyeballing and it's a dumb thing to ask. And maybe even shameless to ask since I basically want to copy her work

Bald-caps for cosplay?
Anything I should take into consideration?
Which are good ones?
What should I avoid, when I want to buy one?

File: file.png (113.3 KB)

113.3 KB PNG

I'm pretty sure I can make this on my own, but I'm not sure where to begin, especially with a base jacket, I don't think any gakuran I could find on amazon or whatever is coat like, where should I begin?

File: Screenshot_20260126_010323.png (277.1 KB)

277.1 KB PNG

I want to create a beard that will magnetically attach to a real steel full helm, one in the style of Alex Yiik.
How can I go about doing that?

First time on /cgl/. What are cons like? How often do you get approached by strangers? What are they like usually?

>>10967671
>What are cons like?
Varies wildly, usually by venue and size. What you'll always get are people there to buy overpriced plastic they don't need and see guests who don't wanna be there. A far higher concentration of weird / interesting characters than you'll get on the street
>How often do you get approached by strangers?
Again, varies wildly. Of course the better your costume the more they'll want to no matter what
>What are they like usually?
They take a picture, might say something they like about the costume you have and the series it's from, they ask to add on Instagram then move on

>>10967672
Thanks anon. I'd really like to go to one someday. What are some things you wish you knew before you went to your first con? Are there any taboos that aren't obvious to newcomers?

>>10967676
Judt dont touch anyone

File: 1761751211895742.jpg (72 KB)

72 KB JPG

> once again feeling the urge to start a massive project that'll likely take me months, if not years to complete
Took me like 14 months to fully finish my Guts costume, then I see this... God fucking DAMnn