/po/ - Thread 610550 | defchan Proxy

Anonymous
Papercraft and Origami Help 01/21/23(Sat)17:12:21 No.610550

Papercraft and Origami Help Anonymous 01/21/23(Sat)17:12:21 No.610550 [Reply]▶

File: 8C396540-26EF-4656-8BC4-B21D7652EF65.png (1.3 MB)

I had a question but none of the existing threads are really too relevant so I thought making a general help thread from the get-go (beyond what’s in the welcome thread) would be good so even if my question gets answered the thread can be used for other people’s questions

I’m making a papercraft where I want to paint part of it gold for some extra pop, but I want neat and clean lines. I’ve seen a lot of artists use washi tape to do this in their art and I want something similar, but I have inkjet prints and don’t want any of the ink to lift up. Any tape recommendations? Or possibly other techniques? I’ve done some googling but I don’t wanna take my chances with buying a ton of tape just to test it.

19 RepliesView Thread

Showing all 19 replies.

Piggy
01/21/23(Sat)20:08:09 No.610552

Piggy 01/21/23(Sat)20:08:09 No.610552▶

>>610550
Blue tape shouldnt lift it,I can check masking tape when i get home if you want, i have an HP2700 inkjet too.

Could also just use a ruler to separate where you do and don't want lines.

Anonymous
01/21/23(Sat)20:54:52 No.610553

Anonymous 01/21/23(Sat)20:54:52 No.610553▶

>>610552
If you’re able to test it that would be great! I already have the paint so I would prefer that (since a ruler can move around and I’m using a brush) but if worse comes to shove I’ll just look into buying a paint pen and using the ruler with that

Piggy
01/21/23(Sat)21:02:02 No.610554

Piggy 01/21/23(Sat)21:02:02 No.610554▶

>>610553
I'll come back to this thread later then, i work for another like 7 hours, I'll leave the tape on for awhile too before tryna pull it off.

funny capchta TRS0S

Piggy
01/22/23(Sun)19:33:11 No.610566

Piggy 01/22/23(Sun)19:33:11 No.610566▶

>>610553
So I'm a little late, I didnt notice any tearing after leaving it on for like 30 minutes, for security tho I would suggest just trying yourself with some masking tape, its cheap couple bucks a roll. Its what I use for Airbrushing and it doesnt seem to rip up airbrush paint for the record.

Anonymous
01/22/23(Sun)21:16:07 No.610567

Anonymous 01/22/23(Sun)21:16:07 No.610567▶

File: 5a97ba362033aeee2c3f3fdeb246110e.jpg (38.7 KB)

38.7 KB JPG

>>610550
Does anyone know if there are any Cospa papercraft templates online? I think they're typically plastic, but I've heard that there's templates online. Pic related is what they look like.

Anonymous
01/30/23(Mon)16:48:13 No.610782

Anonymous 01/30/23(Mon)16:48:13 No.610782▶

>>610566
Sorry for not responding, was very busy.
Thanks for the advice! I’ll just test with some different tapes when I get the chance and post my results

>>610567
There’s a template by NC Empire, just scroll down a bit and you’ll find it
https://ncempire.net/download

Anonymous
01/30/23(Mon)21:49:04 No.610791

Anonymous 01/30/23(Mon)21:49:04 No.610791▶

Have you tried using gold paper?

Anonymous
03/23/23(Thu)16:24:49 No.611887

Anonymous 03/23/23(Thu)16:24:49 No.611887▶

>>610550
I am looking for a format to make an cut out of samurai armor made of cardboard, if someone has the instructions please post it. I didn’t wan to make a new thread only for that

Anonymous
04/28/23(Fri)15:16:53 No.612504

Anonymous 04/28/23(Fri)15:16:53 No.612504▶

Booth.pm has origami and papercraft .If you know the name of the models of the artist ,mostly Twitter and Instagram .but in Korean or Japanese

Anonymous
06/27/23(Tue)07:35:49 No.614559

Anonymous 06/27/23(Tue)07:35:49 No.614559▶

https://www.youtube.com/watch?v=qVPplOUDAe4
https://www.youtube.com/watch?v=wSesWQ-51ZM
any tips on doing this fold? I'm pretty new to origami and this is killing me. I just want to make something cool for my girlfriend.

Anonymous
07/19/23(Wed)21:42:28 No.615102

Anonymous 07/19/23(Wed)21:42:28 No.615102▶

Bilibili and NicoNico both video anime type apps have alot of paper craft videos

Anonymous
10/22/23(Sun)08:44:00 No.616777

Anonymous 10/22/23(Sun)08:44:00 No.616777▶

>>610550
Your finna seethe though

Anonymous
12/06/23(Wed)17:41:38 No.617459

Anonymous 12/06/23(Wed)17:41:38 No.617459▶

Have you tried using gold paper??

Anonymous
03/21/24(Thu)02:00:52 No.619959

Anonymous 03/21/24(Thu)02:00:52 No.619959▶

File: Robert Lang Crab Step 13 Help Please.png (359.2 KB)

359.2 KB PNG

>>610550
I'm stuck on step 13 of Robert Lang's crab from "Origami Zoo". Pic related.
I also don't know how that fucking triangle in the middle exists suddenly. It makes no sense whatsoever.

Anonymous
03/21/24(Thu)02:08:15 No.619960

Anonymous 03/21/24(Thu)02:08:15 No.619960▶

>>619959
Never mind, I figured it out. I think he left out an important part of these steps. The triangle in the middle was the key for what I was doing wrong. I KNEW I had done everything correct up to this point, so it was just about figuring out what I missed.

Anonymous
09/13/24(Fri)06:20:44 No.621939

Anonymous 09/13/24(Fri)06:20:44 No.621939▶

some sites you use to find templates? im a begginer

Anonymous
04/26/25(Sat)21:50:32 No.627511

Anonymous 04/26/25(Sat)21:50:32 No.627511▶

>>621939
Usually i'm looking fot it at PaperZoneVN, but sometimes at Youtube, Pinterest, yeah cuz i'll take anything free

Anonymous
12/05/25(Fri)01:29:51 No.628704

Anonymous 12/05/25(Fri)01:29:51 No.628704▶

IS PAPERZONEVN DOWN FOR ANYONE ELSE AS WELL... I DON'T WANNA LOOSE YOU BABYYYY I NEED TO MAKE CHRISTMAS GIFTS

Anonymous
02/02/26(Mon)17:56:07 No.628935

Anonymous 02/02/26(Mon)17:56:07 No.628935▶

has anyone used a cutting machine to cut papercraft models? i recently got a silhoutte cameo 3 and i wanna use it on that

Subject
Name
Comment
File	Supported: JPG, PNG, GIF, WebP, WebM, MP4, MP3 (max 4MB)
CAPTCHA

Reply to Thread #610550