AK Buyer's Guides

>Rifles
https://thinlineweapons.com/wiki/index.php/SimpleBuyersGuide
>Magazines
https://thinlineweapons.com/wiki/index.php/AK_Mag_Buyers_Guide#Quality

>>64825739
How big is her penis (feminine)

File: Mug AK.webm (3.2 MB)

3.2 MB WEBM

>>64825928
Mug is a woman (female), how new are you

Is there a proper dimension for how far the piston head inserts into the gas block?

File: AK-74.webm (3.4 MB)

3.4 MB WEBM

>>64826057
Doubt

File: 1473126023576.jpg (1 MB)

1 MB JPG

>>64825739
>>64825944
Don't you have some kids to groom, tranny? Fuck all the way off nigger
>ywnbaw

Is there any reason to buy an SLR104 over a good kit build with original barrel other than resale value?

File: 1695686771219540.jpg (167.4 KB)

167.4 KB JPG

>>64826207
Imo, no not particularly. Especially if you want to use certain 5.5mm "military" type stocks, it might be better to go with a kit.
Getting into 5.45 seems like a fools errand to me, but sometimes you want what you want.

>>64826318
Honestly at the rate I shoot these days ammo prices don’t make a difference. I find a lot of 5.45 for around what I’m paying for 7.62x39 and I was thinking of getting an MP5 clone of some kind for when I want to shoot on the cheap.

File: IMG_1998.jpg (2.3 MB)

2.3 MB JPG

Anyone ever try this stuff. I see it every time I go to this store

File: hg6038-n_draco_s_-1_copy__13955.jpg (101.7 KB)

101.7 KB JPG

>>64826339
>>64826339
>I was thinking of getting an MP5 clone of some kind for when I want to shoot on the cheap.
>The AK to HK pipeline is real.
Auslander raus
If you just want a 9mm trashblaster, why not an AK?

>>64826359
I have a small collection of STALKER guns and there is no 9mm AK in the original trilogy. It would actually be my only western gun other than my pistol grip Maverick 88.

If brass Belom and Igman is only 3 cents a round over steel TelaAmmo is it worth using? I read that ak's will mangle brass so I might not be able to reload but if I ever get a furnace I might be able to melt down the brass and use it for casting parts I can use on my lathe/mill

>>64826432
I run Belom out of my Saiga and have no issues with anything that would prevent you from reloading it. And it’s great ammo, very clean.

File: ResizedImage_2026-01-17_11-42-27_1.jpg (2.5 MB)

2.5 MB JPG

>>64826339
Get MP5, cooler than any 9mm AK's available.

>>64826438
cool ill probably go with that

File: Screenshot_20260201_031629.png (32.6 KB)

32.6 KB PNG

>>64826480
>>64826438
I did go with that

All my niggas corrosion test their ammo.

The only ammo i didn't find a batch of corrosive in them somewhat was Barnaul and S&B.

File: SMRT.gif (845.8 KB)

845.8 KB GIF

>>64826799
>Shoot exclusively M-67
>No need to check, it's definitely corrosive
Plus I get spare stripper clips for my SKSes.

Who makes a good tri-rail pic handguard? I want to add a vfg and a light. Don’t want to shell out 6 gorillion for zenitco or an entire chassis system

File: 1755063814025215.jpg (2.7 MB)

2.7 MB JPG

>>64826469
>cooler than any 9mm AK's available
The Vityaz is pretty cool, cheap, and a lot of fun to shoot.

https://www.youtube.com/watch?v=7GQVUkyfX9Y
Damn they really be letting them rip over there. ISIS AKs are cool.

>>64827019
based

>>64827482
>Vityaz
>cheap
Nigga wut

>>64826095
Is there actually a consensus against posting Mug on /akg/ or are you the only one who has a problem with it?

>>64827596
You got me there, it's not as cheap as it was when I got my KP-9. The magazines still beat a MP5, they're only $30 a pop for new old stock.

>>64827569
>>64827594
Not an AK

>>64828694
NTA but tranny posting outside of its containment board should be a banable offense.

>>64827594
ziggas rockin the oneleaf?

File: krinkWIP.jpg (192.7 KB)

192.7 KB JPG

Made some more progress on my Sadu Krink build. I'm using a recreator CL CHF barrel with PSA Krink components. The PSA components came with rust on them (they warn about this on the website listing) but they seem to be in spec when it comes to bore size. My only complaint is that they don't come with pilot holes which is a pain in the dick. OFC they're not chrome lined but I don't really care about that because it saved me hundred of dollars.

I think this is a Childer's Romanian receiver but I can't remember. I cut all the side folder holes by hand with a drill and files. The furniture is from Riley but I won't be keeping it for long because I intend on installing the Groza conversion on this one.

File: fronttrunnionsidefolderconversion.jpg (250.4 KB)

250.4 KB JPG

Milling a spot in the AKM trunnion so it can accept the side folding latch.

>>64829397
what milling machine? looks like round column

File: RPK.jpg (156.6 KB)

156.6 KB JPG

>>64829207
But this is a woman (female)

File: kyberpasslatchcut.jpg (229.7 KB)

229.7 KB JPG

>>64829416
Milling is a bit of a stretch on my part. Its actually just an endmill bit in my cheap drill press with a cross slide vice bolted onto it. Its fucking terrible and I don't suggest you do it for anything other than very gross/crude cuts. In this case I just needed a flat spot to drill out the pin hole. Some trunnions have a step right where the hole goes so the bit will walk unless you flatten it.

File: 4ff47fbf517b1bc03129eb3bdc7b8274c335350ee416ee843ef52f9c8eb35f58.png (173.6 KB)

173.6 KB PNG

>>64829425
chubby Mugi gets me really turned on. Love when a woman puts on the pounds after having kids

File: mugich.jpg (266 KB)

266 KB JPG

>>64829450
Oel ngati kameie, architect anon

>>64829487
I love watching Mugi and Mae from C&Rsenal shoot cause the recoil makes them jiggle lmao

File: PXL_20250517_191023570.jpg (2.1 MB)

2.1 MB JPG

>>64829440
Oh ok I was just curious yeah a drill press isn't the best they aren't really rigid enough for something like that but if it works send it
I have a bridgebort ive been learning machining on

File: SKS - C&Rsenal.mp4 (4 MB)

4 MB MP4

>>64829500
>Mae from C&Rsenal
Thanks for the rec!

File: __original_drawn_by_alf874__1b4313785ce15f68f905483fae890733.jpg (516.4 KB)

516.4 KB JPG

>>64829521
If I were unleashed with a proper mill I'd be doing heinous shit. I've been thinking about getting one of the cheaper grizzly mills or a drill/lathe combo because I'm short on space.

File: PXL_20250406_001822902.jpg (2.8 MB)

2.8 MB JPG

>>64829563
You would probably be better off with two separate machines if you wanted a lathe as well. If you do get a mill i would avoid something with a round column because if you have to move the Z axis you will have to find your part again.

>>64825739
>>64825944
goonerbin

File: Photo Feb 01 2026, 20 27 50.jpg (620.1 KB)

620.1 KB JPG

Traditional or slutty? I like slutty because its a 5.56, which is already nonstandard in my mind and I don’t have any other slut rifles.

>>64829939
5.56 IS a standard cartridge for AKs. The Galil has existed for 50+ years ffs.

>>64829958
Nah. Galils are Jewish, and Jews are nonstandard hominids (demons). 7.62 and 5.45 are the only real AKs.

>>64829963
I guess Bulgarians, Poles, and Serbians are also that too since they have all made AKs in 5.56 that are standard issue in their militaries.

>>64829992
Bulgaria, Poland and Serbia all adopted 5.56 in the 1990’s after the fall of the Soviet Union. Serbia also never issued the M90 in large numbers. If it came about post-communism, it is NOT a real AK. Sorry, I don’t make the rules anon.

File: Hush.jpg (80.3 KB)

80.3 KB JPG

>>64830018
>I don’t make the rules anon
And good thing because you're a fucking retarded nigger.
>hurr dis AK didn't come from the Kalashnikov region of Russia so it's not a REAL AK, it just a sparkling assault weapon
kys

>>64830058
Anon, you were the one stating that 5.56 has been utilized for 50+ years as a standard cartridge for AKs. Seethe all you want, you’re still incorrect lol
Sorry you missed the boat on 5.45 like all the other redditors, but 5.56 is not a real AK.

File: 1C82DED1-15E7-4034-B096-135FE9581D34.jpg (322.8 KB)

322.8 KB JPG

>>64830126
No, I wasn't. I had years to ignore 5.45, and will do the same with 5.56 AKs.
But that doesn't make them "not AKs".
>deflect to pReddit
Cope more, here's a 5.56 Romy Champ to cry on.

>>64830018
Every AK from post fall of the Soviet Union isn't an AK? Kalashnikov didn't pack his bags and leave with the Soviet Union. AK-101? aww its an export model so its no real either... stupid faggot

Anybody in europe got a romanian folding stock? Desperately trying to find one

>>64825944
awful trigger control jesus christ its like the bitch only shoots on camera

File: RPK Frieren.mp4 (4 MB)

4 MB MP4

>>64830502
Given the prevalence of "trigger slap" with AK's, maybe she's just trying avoid pain on her index finger

>>64830018
NTA but 5.45x39 is derivative of 5.56x45 the way 7.62x39 was 7.92x33 so I guess the real AK's were the friends we made along the way

>>64829873
This is a neutral thread, you aren't to trespass against me here

>>64830741
Mini-30?

File: Mini-30.mp4 (4 MB)

4 MB MP4

>>64830744
That's derivative of the M14, yeah. Nobody's denying its Garand rifle lineage

File: Screenshot_20260202_094945_Gallery.jpg (689.2 KB)

689.2 KB JPG

>>64825723
>Got a simple polish AK 2 weeks ago.
>added some magpul stuff to make it comfy for myself to handle

What yall think?

I need to purchase a side rail attachement so i can add a red dot or scope, not sure yet, what yall recommend?

>>64830835
>he bought pioneer
sell it and try again

>>64830502
>the bitch only shoots on camera
You need more?

>>64830741
so shitting up /hg/ and /arg/ wasn't enough? do you even own an ak?

>>64830206
>5.56 IS a standard cartridge for AKs. The Galil has existed for 50+ years ffs.
>No, I wasn't.
?
>>64830239
>Every AK from post fall of the Soviet Union isn't an AK?
How many times do you need me to repeat myself before you understand? If its not chambered in 7.62x39 or 5.45x39, its not a real AK.
>AK-101?
Why don’t you post a list of who fielded the 101 and which wars it was utilized in? Do that and then tell us you still think NATO AKs are real AKs.

>>64831307
NTA but why does it matter to you so much? This is like saying a diesel engine truck isn't an automobile because the first car was gasoline powered. Its severely autistic and not in the good way

>>64831335
It doesn’t matter that much to me, I was the one who posted my 5.56 M90 for fuck sake. I have like 4 5.56 AKs lol
If you’re gonna (you) me I’m gonna (you) back. I think NATO AKs are cool, fun and a viable weapon but I’m not gonna delude myself into thinking its a real AK. Its a 5.45 cope, thats why you see all these faggy reddit niggers putting pod arms followers in 5.45 mags. Is a goofy ass 7.62x39 AR15 a real AR? Fuck no.
>severely autistic
NS, look where you are anon

>>64831307
>Why don’t you post a list of who fielded the 101 and which wars it was utilized in
What kind of criteria is this lmao? Stupid fuck

>>64831359
Real AK criteria obviously

>>64831291
I haven’t done anything wrong here other than not owning an AK

none of you better fall of this

>>64831355
So Poland is just coping by using the Beryl? I seriously gotta ask but how can you be a snob and a retard at the same time?

>>64831488
Unironically, yes. Poland was so desperate to clean NATO toilets they developed the Tantal and the Beryl. They don’t even make the Beryl anymore, they’re onto the Grot because even Poland realized that 5.56 AKs are a meme.

Does anyone happen to have the ribbed CNC warrior extended 4 piece flash hider? They still make the smooth one but im after the ribbed one to fit the vibe of my build. If anyone has one they wanna get rid of either reply to this or shoot me an email at
Galilfag@protonmail.com

>>64831620
Retarded got it.

>>64831971
Almost as retarded as thinking that 5.56 has been standard AK cartridge for over 50 years lmao noguns

>>64831307
The equivalent of this retarded niggerdom would be a fal autist claiming any fal not chambered in 7.92 kurz or 303 british isn't a real fal. Maybe you should cover your dick in honey and stick it in a beehive. It sounds more pf your speed, sped.

File: krank.jpg (243.9 KB)

243.9 KB JPG

>>64832548
It is truly an odd, if not wrong opinion to have

Finished Headspacing and riveting today. Had to modify my AK builder jig in order to crush the folding trunnion rivets. By default it won't extend far enough because you might bend it. Seemed to work fine for me. Tomorrow I'll replace the gas piston in order to finish populating the barrel. It's a shame that I have to drill out piston rivet because I really like the purple/red finish on the bolt carrier. I might try the Birchwood Casey "browning" solution they make for black powder guns because I'd really prefer to keep the plum look.

>>64832548
Damn you really are a noguns. The FN FAL was prototyped in 7.92 Kurz and later .280 British, not .303 you retard black gorilla nigger.

>>64832524
>not loaded
Kek poo fag, also where you get your ribbed molot mag on the far right?

>>64832768
Have you decided on what finish you are going to use or just raw dog the raw metal?

>>64829440
Which cross slide vise do you have? My wen is pretty solid. Converting my Saigas with this tax return.

>>64832832
Note you only focus on a minor error and not the fact that a fal in 7.92 kurz, .280 british or 7.62 nato is still a fal you giga nigger. Go play with fetch with an ICE flasbang.

File: phosphatetank.jpg (192.9 KB)

192.9 KB JPG

>>64832869
Its an AMYAMY "3 inch Cross Slide Drill Press Vise 2 Way X-Y Compound Vise Mill Drill Press"
It does everything I need it to. I got this one because it was the only cross slide that would fit on my tiny drill press table

>>64832840
I will probably Parkerize it and spray paint Rustoleum over it. Might just leave it parkerized if it stays too cold to paint

>>64832899
>minor error
Noguns cope. You don’t know shit about guns because you don’t own any.
Besides, your comparison is apples and oranges because the FAL was DEVELOPED for the 7.62x51 round. The AK was not developed around a NATO cartridge, that came ~50 years later solely for commercial export.

>>64832946
>FAL was DEVELOPED for the 7.62x51 round
mmm no sweetie try again. Keep trying you'll get it eventually. I'll be here for you until then

File: Oy vey.png (48.6 KB)

48.6 KB PNG

>>64832042
>1972 was yesterday, bro

File: 1748986826592486.jpg (57.4 KB)

57.4 KB JPG

>>64833150
>Born too late for $350 Valmets
>Born too early for the remaining surp to finally get out of the Eastern bloc
>Born just in time for overpriced AKs and ammo shortages

>>64833035
>>64833709
Only Jews could design something this ugly. Yuck

File: retarded.png (431.3 KB)

431.3 KB PNG

anyone know if aim sports side mount is gtg? i don't feel like giving rs a gorillion dollars for some scaffolding.

>>64834480
If you wanna mount a cog the mastermount is pretty slick

>>64833709
Its so evil as hell looking

File: 1737342518902185.jpg (17 KB)

17 KB JPG

>>64834153
So no refuting it is an AK made, as standard, in 5.56? I accept your concession.

File: DSC01988__81954.jpg (70.9 KB)

70.9 KB JPG

Anyone have any experience with the meridian trigger? I want a good trigger that isn't gonna beat the shit out of the internals

>>64835790
Thought getting one too, has the same aesthetics of a standard AK trigger but the performance of an ALG, only review I have seen is from klayco, still waiting for more reviews.

File: Screenshot_20260204_012804.png (28.6 KB)

28.6 KB PNG

fucking ship already

File: heavy.png (258.3 KB)

258.3 KB PNG

Anybody here mill out an AWB WASR-10 to accept double stack mags? Looking to do it for mine but don't know the whole process, am newfag to AKs

File: 120894-bd2ff2ca340740e7d689fdbbc8c0aaaf.jpg (15.5 KB)

15.5 KB JPG

>>64836495
Not personally, no. But a lot of the single stack magwell WASRs also had single stack bolts.
So if you open up the magwell it could end up with feeding issues because of that iirc.

File: 83hty.jpg (42.5 KB)

42.5 KB JPG

Would it be pointless to buy this for a 16" AK? Reports vary on whether or not it'll cycle a semi-auto. This will be on a 16" with a CAT ODB.

>>64836067
Holy shit those prices are high as giraffe pussy

>>64836991
Tariffs, Springfield imports MIM parts from India on the M1A.

>>64836702
Its easy enough to do with hand files and and a dremel. Don't listen to anyone that says the magwell or lack of receiver dimples cause mag wobble because it's not true. The fit up is determined by the front trunnion lip and the mag release lever. As some other nigga already said take another look at your bolt because some of them are narrow enough to cause problems. You could buy a proper AKM bolt but you can't just expect it headspace properly so you will have to spend an additional $100 on go, no-go gauges. If you have a single stock bolt I would advise buying a new bolt and headspace gauges before modifying your rifle

>headspace on new bolt is good
go ahead and carve out the magwell

>headspace is bad
leave the rifle as is unless you are willing to re-headspace the rifle with the proper bolt

If you already have a double stack bolt then disregard everything I said I just carve out the magwell

>>64837330
oops meant to tag>>64836495

File: B&T.png (303.8 KB)

303.8 KB PNG

>>64835790
>I want a good trigger that isn't gonna beat the shit out of the internals

Even if someone said to you that it was good to go, it would still doesn't matter because parts hardness, obviously, is completely different from one rifle to another, sometimes even completely different from the same rifle model from the same manufacturer.

That being said it seems that it's not shipped with a hammer (?) so that's already something less to worry about. Altough, a hammer beating parts to death tells more about the quality of the parts than the hammer itself to begin with but some mfs aren't ready to have this discussion.

>>64837487
Depends on the gun. I think that a lot of the US triggers are overly hard compared to surplus triggers. I also suspect that a lot of people with aftermarket triggers end up having to immediately reprofile them (for cycling purposes) which saves their rifle from being mushed.

Depending on which method was used to harden the hammer, the hardest part of the hardening can range be anywhere from a few microns to a few thousandths deep which will naturally be ground off if you reprofile the hump.

>>64825739
Woah that guy is really weak. My 10 year old daughter can rack an AK in one motion

>>64833709
Where do I get a good old style galil with wood furniture? All I can ever find is jra slop

File: valmet and galil.png (2.8 MB)

2.8 MB PNG

>>64838279
You're gonna get JRA slop, Southern Tactislop, or a kit build after waiting 2 years at Hillbilly Firearms, and you're gonna fuckin like it.

>>64836702
>>64837330
>>64837335
thanks for the replies bros

File: PXL_20251016_231718720~2.jpg (3.1 MB)

3.1 MB JPG

>>64836746
>CAT
Aren't those pretty low back pressure?
>Cycle
AFAIK those dumb gay retarded 182gr 7.62x39 were developed for legitimately bolt guns. They certainly won't cycle and SBR AK, and they would be my last suggestion for cycling a 16" AK

If you look around you can find Brown Bear 196gr subsonic 7.62x39, both new from vendors and from guys selling it used on AKfiles, reddit, and Tacswap.
Hornady SubX 255gr also is pretty easy to find new from vendors

Both of these should cycle a mil spec gassed 16" AKM especially if you have a moderately high back pressure can.

Brown Bear 196gr cycles my 16" SKS with both a Dead Air Sandman K and a SilencerCo Omega 300

https://sgammo.com/product/200-round-case-762x39-hornady-255-grain-subx-subsonic-ammo-80787/

https://www.k-var.com/ammo-brown-bear-762x39-196gr-fmj-500-rounds

Don't get me wrong, buy a box of the PPU 182 grain and see, but don't be surprised if it doesn't cycle.
Also 182 grain is insanely dumb and weak and gay when barrel twist rate stabilization not withstanding, clearly you can fit a 255gr hollow point of all things in there and load it for subs. No reason why 7.62x39 subs don't START at 255gr except yeah the stabilization issue I guess.

>>64837000
That sucks man. I paid $1,299 for mine from PSA back RIGHT before Covid in 2020. I think Sportsman's had them for like $1,199.
>>64838853
Thanks for that. Yeah the CAT is low back pressure, and after digging around a lot more it looks like the PPU 182's are not designed to cycle at all. I may still pick up a couple of boxes for the fun factor and/or hunting.

File: 1746246290402851.png (1.4 MB)

1.4 MB PNG

AKtism question: left or right, which is commie correct? Also, yes, this is what /akg/ has devolved into.

>>64842280
IDK but I usually do it with the latch opening facing outwards so it doesn't chew up the handguard

File: Jack.jpg (2.1 MB)

2.1 MB JPG

>>64842280
Left

>>64842280
WBPchad got it it's left

>>64842354
>>64842298
>>64842293
Thanks

WASRs are now $1k

It's never been more over

>>64842802
atlantic has em for 850

File: Cz2000-variants.jpg (33.6 KB)

33.6 KB JPG

>>64827587
MIGHTY NEED

File: Screenshot from 2026-02-06 10-28-20.png (572.8 KB)

572.8 KB PNG

https://www.youtube.com/watch?v=FxXfiXfMWp4&t=213s

File: gunfighterkazu.jpg (487 KB)

487 KB JPG

Do any of you anons own a Zasatava AK suppressor and what do you think about it? I have a Wolverine and love it but my buddy wants a Zastava can on his M70.

File: PXL_20260206_164900184.MP.jpg (1.1 MB)

1.1 MB JPG

Yeah

>>64842802
They go for like $550-650, used, on Gunbroker. I got mine for like $505 two years ago on there. You can also find the para model for $650~ right now new if you look around.

>>64842831
Even cheaper elsewhere, fuck Kikelantic

>>64843456
Price?

>>64843455
I've shot my Wolverine on my friends ZPOOP, it's fine. It's just a heavy can on a heavy rifle.
>lift more
Ok boss I will.